Documents

Some copper deposits can have up to a dozen strategic and critical mineral and materials as co- products, making copper a gateway mineral to these rare elements.

This is the Record of Decision (ROD) for the U.S. Department of Agriculture, Tonto National Forest's travel management decision to comply with the 2005 Travel Management Rule, 36 CFR 212 Subpart B, to provide a system of National Forest System roads, trails, and areas on National Forest System Lands that are designated for motor vehicle use.

The purpose of this investigation was to assess the Property and surrounding areas to identify the presence or potential presence of recognized environmental conditions (RECs) potentially resulting in environmental impacts to the Property.

This document presents the monitoring and quality assurance project plan for a meteorological monitoring program to be implemented for Resolution Copper Company for a copper mine in Pinal County Arizona. The objectives of the monitoring program are to provide the measurements necessary to establish meteorological conditions that affect the transport and dispersion of emissions from potential sources at the future Resolution facility.

An evaluation of an approximately 560-acre private parcel for the presence of potential waters of the U.S.

This report summarizes the meteorological, nitrogen dioxide (NO2), sulfur dioxide (SO2), ozone (O3), and particulate matter (PM) data collected at the Resolution Copper Project near Superior, Arizona for the fourth quarter, October 1-December 31, 2014.

An ecological overview for approximately 59.5 hectares of land along Turkey and Rock Creeks within the Tonto National Forest in Gila County, Arizona (referred to as JX Ranch). This evaluation of the property was conducted to: Identify the types and relative condition of the biological resources found; Evaluate the ecological characteristics; Identify remarkable resource attributes, and; Briefly assess the resource conservation values and opportunities in reference to local and regional contexts.

Bat surveys were conducted in the project vicinity. The purpose of this project was to compile baseline data on bat species from surveys conducted in 2011 and previous surveys conducted in the vicinity in 1996, 2001, 2002, and 2004.

Data collected during this wildlife camera monitoring survey provides a preliminary inventory of wildlife species in the vicinity of the proposed project and in the broader area.

These test methods cover laboratory compaction methods used to determine the relationship between molding water content and dry unit weight of soils (compaction curve) compacted in a 4 or 6-in. (101.6 or 152.4-mm) diameter mold with a 5.50-lbf (24.5-N) rammer dropped from a height of 12.0 in. (305 mm) producing a compactive effort of 12 400 ft-lbf/ ft3 (600 kN-m/m3).