Breadcrumb

  1. Home
  2. Documents
  3. Authors
  4. SWCA Environmental Consultants

SWCA Environmental Consultants

The documents listed below were authored by SWCA Environmental Consultants.

The purpose of this process memorandum is to provide an overview of these potential effects and outline approaches to assess these risks in the draft environmental impact statement (EIS).

Meeting notes from Resolution Groundwater WG #8 May 15, 2018

Summarize available guidance regarding the selection of appropriate baseline conditions against which Resolution Copper project impacts will be compared; and where necessary, document the rationale for selecting baseline conditions for specific resources.

Meeting minutes for Resolution Geology / Subsidence Working Group March 16, 2018

The purpose of this process memorandum is to identify the best sources of information related to climate change in the Southwest and provide a summary of this information for specialists working on the Resolution Copper Mine and Land Exchange EIS.

The purpose of this process memorandum is to provide consistent time frames for each of the three mine phases—(1) construction, (2) operations, and (3) closure and reclamation—and the overall mine life as described for the proposed action in the “General Plan of Operations” (GPO).

The purpose of this process memorandum (memo) is to provide a summary of existing, open-pit mines located throughout Arizona that were identified for consideration as a potential alternative location for disposing of tailings from the Resolution Copper Project.

The purpose of this process memorandum is to provide consistent time frames for each of the three mine phases—(1) construction, (2) operations, and (3) closure and reclamation—and the overall mine life as described for the proposed action in the “General Plan of Operations” (GPO).

Technical memorandum with review and classification of alternatives to block caving, literature review, review of other pertinent block caving operations world-wide, an estimate of the total tons of potentially mineable material, projection of the tons vs cut-off grade (COG) line to other COGs, and discuss possible realistic alternative mining methods which may be utilized instead of block caving.

The purpose of this process memorandum is to document information received from Resolution Copper regarding the variation in the lithology of mined material over the mine life.